Having Trouble Flashing?

If the embedded Daisy Web Programmer does not work, open it in a new tab:

Open Daisy Web Programmer
  1. Download the pedal firmware .bin file from this site.
  2. Connect your Daisy Pod via USB.
  3. Put your Daisy Pod in bootloader mode: Hold BOOT, press RESET, then release BOOT.
    See instructions with picture
  4. Open the Daisy Web Programmer in Chrome or Edge.
  5. Click Connect and select your Daisy Pod device.
  6. Click Choose File and select the .bin file you downloaded.
  7. Click Program and wait for the process to complete.
  8. Once done, press RESET on your Daisy Pod to start the new pedal!

Need help? See the official Daisy programming guide.